Processing range:
Usually, pipes or round bars with a diameter within a certain range (such as Φ10-Φ80mm) can be processed.
Processing accuracy:
The processing accuracy is high, and the general length tolerance can be controlled within ±0.05mm.
Processing materials:
It can be applied to a variety of materials, including steel pipes, iron pipes, stainless steel pipes, aluminum pipes, copper pipes, plastic pipes, nylon pipes, round bars, etc.
Structural design:
Double-end processing structure:
It has two chamfering heads, which can chamfer both ends of the workpiece at the same time. Compared with single-head chamfering machines, it can greatly improve processing efficiency.
Mould clamps and cutter discs:
The clamps and cutter discs are generally carefully designed to ensure that the center line of the processing object and the cutter disc is accurate and unchanged, so that the workpiece can be processed evenly at one time.
Feeding and positioning device:
Some are equipped with a vibration plate for automatic feeding, and can also be manually discharged. At the same time, a positioning device is provided to ensure the position accuracy of the workpiece during the processing process.
Performance characteristics:
Easy operation:
The control system mostly uses PLC color touch screen, the operation interface is intuitive, and the parameter setting is convenient.
Efficient processing:
After manual feeding, it can automatically clamp and automatically advance and retract the tool, and there may be two stages of speed. The first stage is fast to save time, and the second stage can adjust the cutting chamfering speed to complete a smooth surface.
Fault diagnosis:
Generally, it has a built-in fault alarm system that can display the source of the fault, which is convenient for rapid troubleshooting and repair of faults and reduces downtime.
Model | 80WD – Q/Y (Long Material) |
Main engine motor | 2.2 kilowatts × 4 – pole |
Processing capacity | Pipe diameter: Φ10 – Φ80mm; Outer corner of round bar: Φ10 – Φ60mm |
Wall thickness | Pneumatic: ≤4mm; Hydraulic: ≤8mm |
Processing length | 30 -200mm, optional extension, up to 2000mm at most |
Standard configuration | One standard tool bit, one set of fixtures |
Machine weight | 850 kilograms |
Machine size | 2125×1000×1300 millimeters |
Characteristics | Aimed at relatively long and light – weight pipes, with a processing accuracy of length up to ±0.1mm |